Free ground shipping in the contiguous 48 United States for orders over $100.
Our through the wall Letter Drop Chute comes in three cover plate finish choices: Black, Antique Copper and Silver color. There are two chute length options, the first option will work on walls up to 6 inches and the second option will work on walls up to 9.5 inches. Please note, these chutes are not adjustable so if your wall is four inches thick and you order the first chute length option expect the chute to stick out ftom the wall a few inches. You can cut the chute to length with a hack saw but it will not be returnable once it has been cut.
If this mail drop chute is not large enough, please check out our Wall Mail Drop Slot.
The letter drop cover plate flips open and the chute has a slight angle to direct the envelopes, cash, keys or whatever will fit in the slot down and through the wall. The chute opening is 9.5 inches wide and 2.5 inches high. The face plate is made from solid brass and coated in a choice of black, silver color or antique copper. There is a thin rubber gasket that goes around the interior of the cover plate.
An optional locking receptacle allows the mail to be collected and kept secured until it is retrieved through the locked door. This drop chute with optional receptacle can work for a wall, a brick column or a gate. The receptacle is 11.5"W x 16.5"H x 13"D and approximately 15 lb.
Through the Wall Drop Chute Specifications:
- Dimensions for the Letter face plate with 6" wall liner: 12.5"W x 5"H x 6"D, 8 lb.
- Dimensions for the Letter face plate with 10" wall liner: 12.5"W x 5"H x 10"D, 12 lb.
- Drop Chute opening: 9.5"W x 2.5"H
- Recptacle Dimensions: 11.5"W x 16.5"H x 13"D, 15 lb.
- Cover face plate colors: Black, Antique Copper and Silver color